Double K Ultimate Shampoo Gallon: How to Use and Dilute It

By Groomer's Warehouse | Published: 2026-11-04

Category: Handleidingen

Learn how to dilute Double K Ultimate Shampoo from the gallon for salon use, with a simple mixing ratio and step-by-step directions for safe, effective baths.

Quick answer

Dilute Double K Ultimate Shampoo from the gallon at roughly 1 part shampoo to 8–16 parts water, depending on coat condition and dirt level. Mix only what you need for the day, and always test on a small area first.

Why dilution matters for gallon shampoos

Double K Ultimate Shampoo is a concentrated formula, so using it straight from the gallon wastes product and can be hard to rinse thoroughly. Proper dilution stretches one gallon across many baths, which is why it suits salons and multi-dog households. The exact ratio is not printed on the label, so start conservatively and adjust based on how the coat responds.

A weaker dilution is safer for frequent use and sensitive skin, while a stronger mix helps with very dirty or smelly coats. Because the formula is emollient and humectant rich, over-concentrating can leave residue that dulls the coat rather than conditioning it.

Choosing the right dilution ratio

For everyday maintenance on a relatively clean coat, aim for about 1:16 (one part shampoo to sixteen parts water). For average dirt, 1:10 is a practical starting point. For very dirty or smelly dogs, use 1:8. These are starting guidelines, not fixed rules—always spot-test and adjust.

If you are unsure, begin with the weaker dilution. You can always add a little more shampoo to the mixing bottle, but you cannot remove it once mixed.

Step-by-step: how to dilute and use Double K Ultimate Shampoo

Gather your mixing tools: Use a clean mixing bottle or bucket with clear measurement markings. Measure water first, then add shampoo—this prevents over-pouring and makes the ratio easy to check. Never mix in an unmarked container; guessing leads to inconsistent results.
Measure water and shampoo: For a 1:10 mix, pour 10 parts water (e.g., 500 ml) into the bottle, then add 1 part shampoo (50 ml). Cap and invert gently to mix—do not shake vigorously, which creates excess foam. Write the ratio and date on the bottle so you can repeat a mix that worked well.
Wet the coat thoroughly: Soak the dog’s coat with warm water down to the skin before applying any shampoo. If the coat is very dirty, pre-rinse to remove loose debris. Skipping this step wastes shampoo and reduces cleaning power.
Apply diluted shampoo evenly: Pour or sponge the diluted mix over the back, sides, and legs, then work it into a lather with your hands or a sponge. Avoid the eyes and ears; use a damp cloth for the face. Pay extra attention to paws, armpits, and the sanitary area, where dirt collects.
Let it sit briefly, then rinse: Leave the lather on for 2–3 minutes for mild coats, or up to 5 minutes for very dirty dogs. Rinse with warm water until the water runs clear and no slick feeling remains. Residue causes dullness and itching—rinse longer than you think necessary.
Adjust for next time: Note how the coat looked and felt after drying. If it seemed greasy, reduce the shampoo ratio next time; if cleaning was insufficient, increase slightly. Store the concentrate in a cool, dry place. Keep a simple log of ratios and results so every bath is predictable.

Product facts

Double K Ultimate Shampoo-Gallon: ULTIMATE® is described as suitable for the widest range of coat types, with luminizing and volumizing effects. That versatility means one gallon can serve many different dogs in a salon, so getting the dilution right helps you use it confidently across coats.
Double K Ultimate Shampoo-Gallon