How to Use Artero Flash-Shine Conditioner for Show Dogs
By Groomer's Warehouse | Published: 2026-10-29
Category: How-to Guides
Learn the step-by-step process to apply Artero Flash-Shine Conditioner on show dogs for a glossy, static-free coat that stands out in the ring.
Quick answer
Use Artero Flash-Shine Conditioner as a leave-in spray after bathing to add gloss, reduce static, and keep your show dog's coat silky and manageable.
Why leave-in conditioning matters for show dogs
Show coats need a polished finish without weighing hair down. A leave-in conditioner like Artero Flash-Shine delivers moisture and shine while letting you control how much product stays on the coat. Rinse-out conditioners can leave residue or soften the coat too much for certain breed standards.
When to skip this product
Artero Flash-Shine is designed for normal to dry coats that benefit from extra gloss and static control. If your dog has an oily coat or you are prepping for a grooming competition that forbids any leave-in products, skip this step or test on a small patch first.
How to apply Artero Flash-Shine Conditioner
- Step 1: Start with a clean, damp coat: Bathe and towel-dry your dog until the coat is damp but not dripping. Artero Flash-Shine works best on freshly cleaned hair because dirt and oil block absorption. Common mistake: applying to a dry or dirty coat reduces shine and may cause uneven coverage.
- Step 2: Shake and mist evenly: Shake the bottle well, then hold it 6–8 inches from the coat. Mist lightly over the body, avoiding the eyes and nose. Use a fine, even spray rather than soaking one spot. Checkpoint: too much product in one area can leave a tacky feel. Start with less; you can always add more.
- Step 3: Work through with a brush or comb: Use a pin slicker or wide-tooth comb to distribute the conditioner from root to tip. This prevents streaks and helps the aloe vera reach the hair shaft. Common mistake: skipping the brush step leaves clumps of product that dry stiff and reduce natural movement.
- Step 4: Air dry or low-heat finish: Let the coat air dry or use a low-heat blow dryer while brushing. High heat can break down the natural ingredients and reduce gloss. Checkpoint: for show day, apply the conditioner the night before so it fully absorbs and the coat settles naturally.
Product facts
- Artero Flash-Shine/Conditioner: Artero Flash-Shine/Conditioner is a leave-in conditioner formulated with aloe vera and other natural ingredients to promote a shiny coat, reduce static, minimize fly aways, and deeply moisturize pet hair. The aloe vera base hydrates without greasiness, making it suitable for show dogs that need a natural gloss without product buildup.
Artero Flash-Shine/Conditioner
