The short answer: comb first, then slicker
For most coats, start with the Andis Steel Comb 7 1/2" to check for tangles and debris, then follow with a slicker brush to smooth and finish the surface. The comb’s fine, spaced teeth are designed to reach through the coat, so it gives you a quick read on where the coat is still catching. A slicker brush works closer to the skin and is better for fluffing and light surface work, but it can skip over deeper tangles if used alone.
This order matters most on double coats and longer furnishings. On short, smooth coats, you may only need the comb for a quick tidy. The comparison below explains why each tool earns its place and where the supplied information stops short.
What the Andis Steel Comb 7 1/2" actually gives you
- Andis Steel Comb 7 1/2": Made from strong steel for strength and durability, and 7 1/2" in length to reach through coat and fur. The steel build resists bending during routine combing, and the 7 1/2" length gives you enough reach to work through medium to long coats without constantly repositioning your hand.

Andis Steel Comb 7 1/2" - Andis Steel Comb 7 1/2": Fine, spaced teeth help remove tangles and debris, keeping the coat neat and tidy. This is the comb’s core job in the comparison: it finds and lifts tangles and debris. That makes it the better first-pass tool before a slicker brush smooths the surface.
Comb vs slicker: where each tool fits
The two tools overlap less than they appear to. Use this side-by-side to decide which one to reach for at each stage of a groom.
- Andis Steel Comb 7 1/2": Best for checking the whole coat for tangles and debris, and for working through longer fur where you need reach. The fine, spaced teeth are the working feature. It is not described as a finishing brush, and the supplied information does not include a detangling routine or a blade-tooth design.
- Slicker brush (general type): Best for surface smoothing, fluffing, and light finishing after the comb has cleared tangles. A slicker’s fine wire pins work close to the skin, but they can glide over deeper tangles if the coat is not combed first. No specific slicker model is supplied here, so treat this as a category comparison rather than a model-to-model test.
A practical grooming comb order
This sequence keeps the comb in its evidence-backed role and uses the slicker where it helps most. It is general grooming guidance, not a manufacturer instruction.
- 1. Comb through a small section: Work the Andis Steel Comb 7 1/2" through a section of coat with the direction of hair growth. If the teeth catch, slow down and work that area before moving on. The comb’s fine, spaced teeth are designed to remove tangles and debris.
- 2. Note where the comb snags: Snagging tells you where the coat still needs work. Spend more time there with the comb rather than jumping straight to the slicker, which can skim over the surface.
- 3. Follow with the slicker: Once the comb passes through with less catching, use the slicker to smooth and fluff the surface. Keep the slicker for finishing rather than as your only tangle tool.
- 4. Re-check with the comb: A final pass with the comb confirms the slicker has not pushed tangles deeper. If the comb still catches, repeat the section before finishing.
When the comb alone is enough
On short, smooth coats, the Andis Steel Comb 7 1/2" may be all you need for a quick tidy. Its 7 1/2" length and fine, spaced teeth are suited to a fast once-over for tangles and debris. In that case, a slicker adds little beyond surface polish.
On longer or denser coats, the comb is still the better first tool, but a slicker becomes useful for finishing. The honest trade-off: the comb is not a finishing brush, and the supplied information does not describe it as a dematting tool. For heavy mats, neither tool is presented here as a solution, and you should not force either through a tight tangle.
What the supplied information does not cover
The Andis Steel Comb record does not include species or size compatibility, coat-type recommendations, or cleaning and care instructions. It also does not specify tooth spacing in measurements or a blade-tooth design. Those gaps are decision limits, not evidence that the comb lacks a feature.
No specific slicker brush product record was supplied for this comparison, so the slicker side is described by tool type only. If you need a model-to-model comparison, check the individual slicker listing for its own specifications before buying.


